| Item |
CE6000-60 PLUS |
| Configuration |
Grit roller with digital servo drive system |
| Cutting area of guaranteed accuracy(W x L) |
584 mm × 2 m |
| (when using the basket) |
584 mm × 5 m |
| Mountable media width |
Min. 50 mm to the max. 712 mm |
| Maximum acceleration |
21.2 m/s2, at 45º direction |
| Maximum cutting force |
4.41 N (450 gf) in 38 steps |
| Minimum character size |
Approx. 5 mm alphanumeric (varies depending on character font and type of media) |
| Programmable resolution |
GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm |
| Repeat-ability |
Max. 0.1 mm in plot up to 2 mm |
| Mountable number of tools |
1 tool |
| Pen type |
Oil-based ballpoint, Water-based fiber-tip pen |
| Media type |
Self-adhesive marking film (vinyl, fluorescent, reflective) excluding high-intensity reflective film, |
| up to 0.25 mm thickness Polyester film, up to 0.25mm thickness (unguaranteed accuracy) |
| Perforation cutting |
Yes (performed by force control) |
| Interface |
RS-232C, USB2.0 |
| Command sets |
GP-GL / HP-GL™ emulation (Set by command or auto-detect) |
| Display |
Graphic type LCD with back-light (240dots x 128dots), supports 10 languages |
| Registration mark sensing system |
Marks are scanned by an optical sensor (ARMS5.0), Segment area and Multiple marks compensation, |
| 4-points axis alignment, Auto mark detect |
| Alignment accuracy |
Maximum 0.3 mm with printed image (when reading registration marks specified by this machine) |
| Power source |
100 to 120, 200 to 240 VAC (Auto switch), 50 / 60 Hz |
| Power consumption |
120 VA |
Reviews
There are no reviews yet.